Novamatic KSTF315-IB Manuel d'utilisateur Page 59

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 58
59
GBGB
So you are asked to be careful - because of the above -
when placing foods wrapped in paper into the appliance.
In case of increased demand e. g. during heat-
waves, the refrigerator temporarily happens to
operate constantly - during this the automatic defrosting
does not work.
Remaining small ice and frost stains on back plate of the
refrigerator after defrosting period is not abnormal.
The freezer cannot be equipped with automatic defrosting
set since the deep-frozen and frozen foods do not endure
melting temperature.
When small frost and ice occurs scrape off and remove
frost and ice coating with the supplied plastic scraper.
When ice coating is so thick that it cannot be removed
with the plastic scraper, the cooling gill have to be defrost-
ed. Frequency of defrosting depends on usage (generally
2-3 times a year).
Take the frozen foods out of the appliance, and put them
into a basket lined with paper or cloth. Store them in a
possibly cool place or replace them into another refriger-
ator.
Pull out the mains plug from the mains socket, so both
parts of the appliance are out of operation.
Open the doors of both parts of the appliance and clean
the refrigerator according to "Regular cleaning".
Maintain and clean the freezer as follows:
In order to lead the thaw water out remove the spout found
at the middle bottom of the appliance, turn and replace it
according to the Fig. Put a proper high bowl under the
spout.
After the defrosting place the spout into its original posi-
tion.
The bowl in figure is not a piece of accessories to the
appliance!
Wipe the surfaces after defrosting and leading the water out.
Put the mains plug into the mains socket and put foods
taken out back to their places.
It is recommended to operate the appliance at the highest
position of the thermostatic control for some hours so that
it can reach the sufficient storing temperature as soon as
possible.
Regular cleaning
Clean the equipment regularly.
Don't use detergents, abrasive or strongly
odorous cleaners, waxy polishing agents or
disinfectants or alkoholic products for cleaning the
equipment.
Before cleaning pull out the wall plug of the equipment
from the outlet.
Internal cleaning
Clean the internal parts of the equipment and the acces-
sories with warm water and sodium bicarbonate (5 ml to
0.5 litre of water).
Rinse and dry everything thoroughly.
Clean the door seal profile with clean water.
Vue de la page 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Commentaires sur ces manuels

Pas de commentaire